Table of Contents
Advertisement
FRYMASTER FPHD65 SERIES GAS FRYERS
1.1 After Purchase
In order to improve service, have the following chart filled in by the Frymaster/Dean Authorized
Servicer who installed this equipment.
Authorized Servicer
Technician/FAS
Address
Telephone/Fax
Model Number
Serial Number
Gas Type
1.2 Ordering Parts
Customers may order parts directly from their local factory authorized servicer. For this address and
phone number, contact your factory authorized servicer or call the Frymaster/Dean Service Hotline
phone number, 1-800-551-8633.
To speed up your order, provide the model number, serial number, gas type, part needed, item part
number (if known), and quantity needed.
1.3 Service Information
Call the Frymaster/Dean Service Hotline, 1-800-551-8633, for the location of your nearest factory
authorized servicer. To assist you more efficiently, always provide the service technician with the
model number, gas type, serial number, and the nature of the problem.
1.4 Computer Information
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. While this device is a verified Class A device, it has been
shown to meet the Class B limits. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
the equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his/her own expense.
CHAPTER 1: INTRODUCTION
1-1
Advertisement
Table of Contents
