Frymaster FPLHDC65 Series Installation & Operation Manual page 42

Hide thumbs Also See for FPLHDC65 Series:
Table of Contents

Advertisement

5.6 Hose and Wand Operation (cont.)
5. The oil will start to flow immediately into the
frypot. Keep the wand inside the frypot at
all times while the filter pump is activated.
6. Rinse debris from the frypot into the filter
pan with the wand.
7. When cleanup is complete, press the
wand/disposal switch to OFF, close the drain
valve
(red
handle)
wand/disposal valve with the blue handle.
8. Disconnect the hose/wand from the fryer.
9. Lift
the
quick-disconnect
hose/wand and drain excess oil into the
frypot.
10. Store the hose/wand in its designated
location.
5.7 Complete Filtering
1. Refill the frypot by rotating the yellow handle
to open the oil-return valve and activate the
filter pump.
2. After the frypot refills, allow the oil to bubble
for 10-15 seconds to ensure evacuation of all
oil from the oil return lines.
yellow handle to close the oil-return valve
and stop the filter pump.
complete. Filter another frypot or return the
fryer to operation.
FRYMASTER FPHD65 SERIES GAS FRYERS
CHAPTER 5: FILTRATION OPERATION
and
close
the
end
of
the
Rotate the
Filtration is
Yellow
Red
The red handle is attached to the drain valve. The
yellow handle is attached to the oil return valve.
Use the optional wand to rinse debris from the
frypot into the filter pan. Maintain a firm grip on
the wand handle at all times.
Return filtered oil to the
frypot
by
rotating
yellow handle to open oil
return valve.
5-16
the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fphd65 seriesFpd65 series

Table of Contents