Assembling - Cuisinart MG-200C Instruction And Recipe Booklet

ASSEMBLING

Make sure unit is unplugged
while assembling.
Assemble the meat grinder feeder head prior to
attaching to the housing.
1. Insert the feed screw pin into the open end
of the attachment.
2. Place the cutter with the flat side facing
out toward you over the feed screw pin
(this is an important step or the meat
grinder will not work).
3. Place the grinding plate over the cutter on
the feed screw pin.
4. Screw on the ring nut by turning it clockwise
and hand tighten.
5. Fit the hopper onto the top of the meat
grinder and put a mixing bowl under the
grinder to catch food.
6. Insert grinder/feeder head tightly into
attachment opening. Twist onto lock.
7. Use the food pusher to gently feed food,
one piece at a time. Do not force the food
into the grinder/feeder head.
CUTTING PLATES
Medium Cutting Plate – Great for ground meat
used in soups, or for relishes
Coarse Cutting Plate – Great for ground meat
used in chili and sausages, or for vegetables
THESE PLATES ARE NOT
DISHWASHER SAFE.
PLEASE HAND-WASH ONLY!
DRY COMPLETELY AND
COAT IN VEGETABLE OIL.
NOTE – REVERSE SWITCH
If the motor slows or stops, change to
"Immediately switch off the Cuisinart Electric
Meat Grinder. Press the REVERSE button
to push the food in the opposite direction.
Press the ON/OFF switch to turn the
Electric Meat Grinder on again.
HOW TO USE
1. Before first use, wash and dry all parts
of the Cuisinart
2. Place the Cuisinart
on a stable work surface.
3. Make sure the unit is off.
4. Secure the meat grinder assembly to the unit.
5. Insert plug into wall outlet.
6. Place a wide, shallow bowl or plate beneath
the grinder tube to catch food.
7. Switch appliance ON. The Cuisinart Electric
Meat Grinder must ALWAYS be ON before
adding food.
8. Place food on the hopper and use pusher
to feed food through opening.
SAUSAGE MAKER
Assembling Sausage Maker
Attachment
Assemble the sausage maker attachment prior
to attaching to the housing.
1. Insert the feed screw pin into the open end
of the grinder.
2. Place the sausage nozzle onto the ring nut
and screw it onto the meat grinder nozzle
by turning it clockwise and hand tighten.
4
® Electric Meat Grinder.
® Electric Meat Grinder