Asko OP8637A Instructions For Use Manual page 25

CLEANING
Pyrolysis
• Then remove any remaining food from the oven space and wipe the
space with a damp cloth.
the pyrolysis process.
Note! The oven space and an enamelled baking tray cannot be cleaned
at the same time using the pyrolysis function. If you want to clean an
enamelled baking tray using pyrolysis, then do this first (the oven space
can become dirty due to the cleaning of the baking tray). Insert one
baking tray at a time. After that, the oven space can be cleaned.
Caution! Do NOT clean the glass baking tray using the 'Pyrolysis'
oven feature.
Starting the Pyrolysis function
1. Make sure the oven space is completely empty and no chunks of
food and fat are present!
2. If you want to clean an enamelled baking tray first, place the special
pyrolysis guide rails in position. Wipe the baking tray with a damp
cloth and slide the baking tray into the oven on Level 2.
▷ Remove these special pyrolysis guide rails after the
cleaning process.
3. Turn the 'oven function dial' to 'Pyrolysis'. The cleaning intensity
level and time are displayed.
4. To choose the desired cleaning intensity level,
'temperature button' and turn the 'selection dial' to select one of
three cleaning levels (one, two or three bars lit).
5. After a certain period of time, oven door will be automatically
locked for your safety. The key symbol will appear on the display.
• Unpleasant smell may be emitted from the oven during the cleaning
process.
• When the oven has cooled down, wipe it with a damp cloth.
Wipe the oven door and the adjacent surfaces in the gasket area.
Do not rub the gasket.
Please note: Do not attempt to open the oven door while the automatic
cleaning programme is in progress. The programme may be terminated.
Risk of burns!
Chunks of food and fat may ignite during
Fire hazard!
press the
EN 25