Epson XP-8700 User Manual page 277

LCD screen message Condition/solution
Cannot recognize ink Check that the ink cartridges are installed correctly. Press down on each of
cartridge. Select "Next" the cartridges gently and make sure they have clicked into place.
to clear the error.
If the incorrect ink cartridges are installed, replace them with ink cartridges
compatible with this printer.
Printer error. Turn the A fatal error has occurred. Check for a paper jam or any protective material
power off and on again. inside the product. Clean the translucent film inside the printer if it is smeared
If the problem persists, with ink. Then, close the scanner unit and turn the product off and back on
press "Proceed". again. If the error continues, contact Epson for support.
Communication error. Make sure the computer is connected to your product and your software is
Check if the computer is installed correctly.
connected.
Paper Configuration is The Paper Configuration setting must be enabled to use AirPrint.
set to Off. Some
features may not be
available. For details,
see your documentation.
The printer's borderless The ink pads are near the end of their service life and the message will be
printing ink pad is displayed until the ink pad is replaced. Contact Epson for support. (To
nearing the end of its resume printing, select OK.)
service life. It is not a
user-replaceable part.
Please contact Epson
support.
The printer's borderless The ink pad is at the end of its service life. Turn off the product and contact
printing ink pad has Epson for support.
reached the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support.
To use cloud services, Access your product's built-in Web Config utility and update the root
update the root certificate for your product.
certificate from the
Epson Web Config
utility.
277