Advertisement
CABLE ROUTING DIAGRAM
1.
Fuel tank breather hose
2.
Clamp
3.
Diode
4.
Hot starter cable
5.
Throttle position sensor lead
6.
Wire harness
7.
Hump (frame)
8.
Negative battery lead
9.
Starter motor lead
CABLE ROUTING DIAGRAM
10. Neutral switch lead
11. AC magneto lead
12. Brake hose
13. Rectifier/regulator lead
14. Carburetor breather hose
15. Carburetor overflow hose
16. Catch tank breather hose
2-21
A.
Insert the end of the fuel tank
breather hose into the hole in
the steering stem.
B.
Fasten the throttle cable, hot
starter cable and rectifier/regula-
tor lead onto the frame. Locate
the clamp end facing the lower
side of the hot starter cable and
cut off the tie end.
Advertisement
