Rear Wheel - Yamaha TT-R110EA Owner's Manual

7. While applying the front brake,
push down hard on the handlebar
several times to check for proper
fork operation.
PERIODIC MAINTENANCE AND ADJUSTMENT

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the cotter pin, the nut and
the bolt.
1. Brake torque rod
2. Cotter pin
3. Brake torque rod bolt and nut
4. Brake shoe plate
7-30
EAU25080 2. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod at the brake cam-
EAU41645
shaft lever.
EWA10821
1. Brake rod
2. Brake pedal free play adjusting nut
3. Brake camshaft lever
4. Wheel axle
3. Fully loosen the locknut and the
drive chain slack adjusting nut on
both ends of the swingarm.
7