Security
Setting DriveLock Passwords
To set a DriveLock password:
1. If you are not sure whether the notebook is off or in
hibernation, press the power button. (The notebook turns
on or restores from hibernation.)
2. Display the Setup message.
❏
❏
3. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > DriveLock
Password, and then press
5. Read the warning, and then press
6. Type the new password in the Enter New Password field,
and then press
7. Type the new password in the Confirm New Password field,
and then press
8. To confirm DriveLock protection on the drive you have
selected, type
press
9. Press
10. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
12–14
If the notebook is on, restart the notebook through the
operating system.
If you are certain that the notebook is off and not in
hibernation, turn the notebook on.
while the Setup message is displayed in the
f10
enter.
enter.
DriveLock
f10.
to continue.
enter
enter.
enter.
in the confirmation field, and then
Hardware and Software Guide
f10,