Initiating Or Resuming From Standby - HP Pavilion ZV6001 Hardware And Software Manual

Power

Initiating or Resuming from Standby

Task
Initiate standby.
Allow the system
to initiate standby.
Resume from
standby.
*Closing the notebook presses the display switch. The function of the display
switch can be changed. For instructions, refer to
Window," later in this chapter.
†
In Windows XP Professional, depending on your network connections, the
Turn Off Computer button may be called the Shut Down button.
2–12
Procedure
With the notebook on, use any of
the following procedures:
■ Press the fn+f5 hotkey.
■ Close the notebook.*
■ In Windows XP Home,
select Start > Turn Off
Computer > Stand By.
No action is required. The system
initiates standby
■ After 10 minutes of inactivity
while running on battery power.
■ After 25 minutes of inactivity
while running on external power.
Use any of the following
procedures:
■ Press any key.
■ Briefly press the power button.
■ Press the fn+f5 hotkey.
✎
Depending on your
notebook configuration, you
may also be able to resume
from standby by activating
the TouchPad or an optional
external mouse.
Result
■ Power/standby
lights blink.
■ Screen is cleared.
†
■ Power/standby
lights blink.
■ Screen is cleared.
■ Power/standby
lights are turned
on.
■ Your work is
returned to the
screen.
"Accessing the Power Options
Hardware and Software Guide