Table of Contents
Advertisement
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge filters as necessary. Replace full dust bags to prevent performance drops. A performance
drop with clean filters can only be caused by a blockage in the tools or the hose.
PROBLEM
The vacuum doesn't
work.
Low suction power
and high operating
noise / vibrations.
The vacuum turns off
on its own.
Dust is escaping from
the motor cover.
TROUBLESHOOTING
POSSIBLE CAUSE
No power.
Functional fault in the power
cord, switch, or motor.
Suction nozzle, hose, or tank
inlet is blocked.
Cartridge filter is blocked.
Float valve has closed.
The power cord is
disconnected from the power
supply.
The filter is missing or
damaged.
Check the power supply and fuse.
Have the damaged part checked by
qualified personnel or contact the after
sales helpline.
Check the suction nozzle, hose, and
tank inlet for obstructions.
Remove the cartridge filter and clean.
Empty the container of any liquid
waste and ensure the float value
located underneath the filter is able to
move freely.
Make sure the plug is connected to the
power supply.
Install the filter correctly or replace it if
it is damaged.
11
SOLUTION
GB
Advertisement
Table of Contents
