Defender Cooper Torch Quick Start Manual

COOPER TORCH
Personal Safety Alarm with Independent Torch
Introduction
The Defender Cooper Torch is a convenient, easily accessible 130dBs* alarm designed
to increase personal safety. The alarm is intended to shock an attacker giving the victim
an opportunity to escape from the scene. Do not rely on the alarm to attract help; your
priority should be to get away from the threat immediately once the alarm has been
sounded.
Note: The Defender Cooper Torch is designed to detach itself from the key ring
attachment once activated to ensure the user does not need to leave their keys at the
scene of the incident.
Operation of the alarm/torch
Before using the Defender Cooper Torch for the first time please remove the plastic
tab covering the batteries by gently pulling it.
1. To activate the alarm, simply pull the key ring attachment out of the alarm. To
de-activate replace the pin into the alarm.
2. To operate the torch function, simply press and hold the button located on the
lower part of the unit.
Battery replacement
It is recommended that the alarm is tested regularly. If the alarm sounds weak, the
batteries should be replaced. To replace the batteries, remove the screws from the
back cover and replace the batteries noting the correct polarity. The unit operates by 3
x LR44 (or equivalent) button batteries.
Remove the screws
to replace batteries
WARNING
The high output siren fitted to this quality personal alarm may cause ear damage if used at
close range for a prolonged period of time. Keep away from children and pets ears. This
product is designed for use as a deterrent; it does not guarantee protection or personal safety.
solonsecurity.co.uk
Product Code: AL00017
* at source