Computer feet
Description
Rubber Feet Kit (includes computer feet and display bezel rubber screw covers)
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
illustrated below.
Memory module
Description
2048-MB (667-MHz, PC2-5300, 1-DIMM)
1024-MB (667-MHz, PC2-5300, 1-DIMM)
512-MB (667-MHz, PC2-5300, 1-DIMM)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Position the computer with the front toward you.
1.
Loosen the two Phillips PM2.5×5.0 captive screws (1) that secure the memory/WLAN module
2.
compartment cover to the computer.
54
Chapter 4 Removal and replacement procedures
Battery on page
47).
Spare part number
448017-001
Spare part number
448003-001
446495-001
446494-001