Bluetooth Module - HP Pavilion DV9500 Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module (includes Bluetooth module cable)
Before removing the Bluetooth module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
g.
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board. The Bluetooth module cable is
1.
included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part
number 448015-001.
Route the Bluetooth module cable (2) under the system board.
2.
Remove the two silver Phillips PM2.0×3.0 screws (3) that secure the Bluetooth module to the base
3.
enclosure.
82 Chapter 4 Removal and replacement procedures
Battery on page 47).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 63)
Speaker assembly on page
Display assembly on page
Top cover on page 75)
59)
61)
66)
69)
Spare part number
412766-002