Initial Setup - ViewSonic ID2456 User Manual

Initial Setup

This section provides detailed instructions for setting up your monitor.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Ensure the adjustable stand is fully retracted.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H) (W x H x D)
HDMI
Type-C
HDMI
Out
Pad Hole
100 mm
13
Screw Specification
& Quantity
M4 x 10 mm
4 pieces
USB 3.0
5V/2A