Usb Connection - ViewSonic ID2456 User Manual

USB Connection

Connect one end of a USB cable to a USB port of the monitor. Then connect the
other end of the cable to a USB port of your computer.
NOTE: The monitor supports three (3) types of USB ports. When making the
connection(s), observe the following guidelines:
• Two (2) USB Type A ports: Connection for your Type A peripheral
device(s). (e.g., storage device).
ͫ NOTE: To activate the USB Type A port, ensure your computer is
• One (1) USB Type B port: Connect the USB Type B male cable (square
with 2 cut corners) to this port, and then connect the other end of the
cable to the USB down stream port of your computer.
• One (1) USB Type C ports: One (1) up stream. Make sure your Type C
output device and cable support video signal transmission.
ͫ NOTE: Power delivery capable, 5V/3A, 9V/3A, 12V/3A, 15V/3A,
also connected to the monitor's USB Type B port.
20V/4.5A. Users can power their notebooks when connected.
HDMI
Type-C
HDMI
Out
Type-C
Type-C
17
USB 3.0
5V/2A