Initial Setup; Installing The Stand - ViewSonic VS19735 User Manual

Initial Setup

This section provides detailed instructions for setting up your monitor.
NOTE: The monitor comes packaged in a user-friendly box to make installation
easy.

Installing the Stand

1. Place the box on a flat, stable surface and open the front flap of the box to reveal
the contents. Remove the top tray.
2. Remove the monitor stand's base and neck. Align and connect the two (2) points
on the monitor stand's base with the monitor stand's neck.
3. Use the captured screw in the monitor stand's base and secure it to the monitor
stand's neck.
1
11
2
1