Using Your Lumea Series 9000 Before And After Tanning; Traveling With The Device; After Use - Philips Lumea BRI957 Manual

Using your Lumea Series 9000 before and after
tanning
Tanning with natural or artificial sunlight
Tanning with creams

Traveling with the device

After use

Aftercare
Note: The battery capacity is not enough for a full body treatment. We
recommend you to use the device corded while treating large body areas
such as legs.
Intentionally exposing your skin to natural or artificial sunlight with the aim
of developing a tan influences the sensitivity and color of your skin.
Therefore the following is important:
- After each treatment, wait at least 48 hours before tanning. Even after
48 hours, make sure that the treated skin does not show any redness
from the treatment anymore.
- If you expose your skin to the sun (without tanning intentionally) in the
48 hours after treatment, use a sunblock SPF 50+ on the treated areas.
After this period, you can use a sunblock SPF 30+ for two weeks.
- After tanning, wait at least 2 weeks before you use Lumea Series 9000
and perform a skin test. This is to determine the appropriate light
intensity setting (see 'B Test skin 24 hrs before treatment').
- Do not use Lumea Series 9000 on sunburned body areas.
Note: Occasional and indirect sun exposure does not qualify as tanning.
If you have used an artificial tanning lotion, wait until the artificial tan is
completely gone before you use the device.
When you travel with the device, check with the airplane carrier to confirm
that the device can be carried and/or used on the airplane.
After use, you can apply lotions, creams, deodorant, moisturizer or
cosmetics to the treated areas.
Warning: If you experience skin irritation or skin redness after
treatment, wait until it disappears before you apply any product
to your skin. If you experience skin irritation after applying a
product to your skin, wash it off with water. If you still get skin
reactions, stop using the device and consult your doctor.
27
English