Philips Lumea BRI957 Manual page 11

- If the device or adapter is broken or damaged, do not touch any
inner part to avoid electric shock.
- Do not use the device if the UV filter of the light exit window
and/or attachment is broken, as safe operation cannot be
guaranteed under these circumstances.
- Do not attempt to open or repair your device or change the non-
replaceable batteries. Opening Philips Lumea Series 9000 may
expose you to dangerous electrical components and to pulsed
light energy, either of which may cause bodily and/or eye injury.
- Always return the device to a service center authorized by Philips
for examination or repair. Repair by unqualified people could
cause an extremely hazardous situation for the user.
- No modification of this equipment is allowed. Do not modify,
override or cut off any part of the device (e.g. battery, adapter or
the cord), as this causes a hazardous situation.
- Do not look at the flash while using the device. Use the device in a
well-lit room so that the light is less glaring to your eyes. While not
necessary for safety, you may wear sunglasses or goggles for your
convenience if you find the light uncomfortable or too bright.
- Do not treat the same skin area more than once during a session.
This may increase the risk of skin reactions.
- For hygienic reasons, the device should only be used by one
person.
- Do not use hair removal creams in the area (to be) treated with
the device, as chemicals may cause skin reactions.
- Do not use any pencil or pen to mark the areas to be treated. This
may cause burns on your skin.
- The device can be stored at a temperature between -25 °C and
70 °C. Charge and use the device at a temperature between 5 °C
and 35 °C. The device will not work properly outside of this
temperature range. This may cause burns on your skin.
11
English