Table of Contents
Advertisement
USB board
Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the USB board:
1.
Position the computer upright with the right side toward you.
2.
Disconnect the USB board cable (1) from the system board.
3.
Remove the Phillips PM2.5×5.0 screw (2) that secures the USB board to the base enclosure.
Battery on page
41).
Hard drive on page
53)
Optical drive on page
Keyboard on page
57)
Top cover on page
59)
55)
Component replacement procedures
Spare part number
608277-001
71
Advertisement
Table of Contents
