Table of Contents
Advertisement
Time-setting options
en
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Setting the heating function and temperature or
1.
setting
Press the
button and use the
v
2.
the cooking time.
Touch the
button again.
v
3.
The end time
is highlighted in the display.
y
Use the
or
button to delay the end time.
@
A
4.
The appliance applies the settings after a few seconds.
The end time is shown in the display. Once the
appliance starts, the cooking time begins to count
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
or
A
@
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
button to set the end time all the
A
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
18
button or
A
button to
@
button to change the end time.
Setting the timer
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
to set
The maximum time that can be set is 23 hours and 59
@
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
Touch the
1.
Use the
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
all the way to zero. The timer is now switched off.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the time flashes, and use the
v
button to change the time.
@
button and 10 minutes if
A
button.
@
button.
M
A
or
@
button to set the timer duration.
or
button to change the timer
A
@
button to reset the timer duration
A
or
button to set the time.
A
@
button.
v
or
A
Advertisement
Table of Contents
