Sony SHAKE-X30D Operating Instructions Manual page 63

Connection is not possible.
The BLUETOOTH device you
• •
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
Enable the BLUETOOTH function of
• •
the BLUETOOTH device.
Establish a connection from the
• •
BLUETOOTH device.
The pairing registration
• •
information has been erased.
Perform the pairing operation
again.
Erase the pairing registration
• •
information of the BLUETOOTH
device (page 41) and perform
the pairing operation again
(page 40).
The sound skips or fluctuates, or
the connection is lost.
The system and the BLUETOOTH
• •
device are too far apart.
If there are obstacles between
• •
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
If there is equipment that
• •
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
Increase the volume on your
• •
BLUETOOTH device first, then
adjust the volume using  +/–.
There is severe hum, noise, or
distorted sound.
If there are obstacles between
• •
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
If there is equipment that
• •
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
Turn down the volume of the
• •
connected BLUETOOTH device.
Control for HDMI ("BRAVIA"
Sync)
The system does not turn on even
when the TV is turned on.
Press SETUP, then set [HDMI
• •
SETUP] – [CONTROL FOR HDMI]
to [ON] (page 35). The TV must
support the Control for HDMI
function (page 47). For details,
refer to the operating instructions
of your TV.
Check the speaker settings of the
• •
TV. The system power syncs with
the speaker settings of the TV.
For details, refer to the operating
instructions of your TV.
If the sound was output from the
• •
TV's speakers the previous time,
the system does not turn on even
when the TV is turned on.
The system turns off when the TV
is turned off.
Check the setting of [HDMI
• •
SETUP] – [STANDBY LINKED TO
TV] (page 35). When [STANDBY
LINKED TO TV] is set to [ON], the
system turns off automatically
when you turn off the TV
regardless of the input.
63
GB