Deactivating The Demonstration - Sony MHC-V50D Operating Instructions Manual

 Audio input and output jacks
Use an audio cable (not supplied)
to make either connection as
follows:
AUDIO/PARTY CHAIN OUT
• •
L/R jacks
•
— Connect to the audio
input jacks of an optional
equipment.
•
— Connect to another audio
system to enjoy the Party
Chain function (page 49).
AUDIO/PARTY CHAIN IN (TV)
• •
L/R jacks
•
— Connect to the audio output
jacks of a TV or an audio/
video equipment. The
sound is output through this
system.
•
— Connect to another audio
system to enjoy the Party
Chain function (page 49).
 FM ANTENNA terminal
Find a location and an
orientation that provide good
reception when you set up the
antennas.
Keep the antenna away from the
AC power cord (mains lead) and
the USB cable to avoid picking
up noise.
Extend the FM lead
antenna horizontally
18
GB
 AC power cord (mains lead)
Connect the AC power cord
(mains lead) (supplied) to the
unit, then slide the cord into the
slot at the unit's foot. Plug the AC
power cord (mains lead) into a
wall outlet.
To wall outlet
The demonstration (page 23)
starts automatically. If you press
 (power) to turn on the system,
the demonstration ends.
Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 23).