Table of Contents
Advertisement
FM ANTENNA terminal
Find a location and an
orientation that provide good
reception when you set up the
antennas.
Keep the antenna away from the
AC power cord (mains lead) and
the USB cable to avoid picking
up noise.
Extend the FM lead
antenna horizontally
AC power cord (mains lead)
Connect the AC power cord
(mains lead) (supplied) to the
unit, then slide the cord into the
slot at the unit's foot. Plug the AC
power cord (mains lead) into a
wall outlet.
To wall outlet
The demonstration (page 18)
starts automatically. If you press
(power) to turn on the system,
the demonstration ends.
16
US
Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 18).
Inserting batteries
Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
Note
• •
Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control
• •
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the system using the
remote control
Point the remote control at the unit's
remote control sensor.
Advertisement
Table of Contents
