Sony SHAKE-X30D Operating Instructions Manual page 58

No TV sound is heard from the
system. "CODE 01" and "SGNL ERR"
appear on the display.
This system supports 2-channel
• •
Linear PCM formats only. Check
the audio output setting on the
TV and change it to PCM output
mode if automatic mode is
selected.
Check that the speaker output
• •
setting on the TV is set to use
external speakers.
There is severe hum or noise.
Move the system away from
• •
sources of noise.
Connect the system to a different
• •
wall outlet.
Install a noise filter (not supplied)
• •
to the AC power cord (mains lead).
Turn off surrounding electrical
• •
equipment.
The noise generated by the
• •
cooling fans of the system may be
heard when the system is turned
on. This is not a malfunction.
Move the unit away from the neon
• •
signs or fluorescent light.
The remote control does not
function.
Remove the obstacles between
• •
the remote control and the unit.
Move the remote control closer to
• •
the unit.
Point the remote control at the
• •
unit's sensor.
Replace the batteries (R03/size
• •
AAA).
Move the unit away from the
• •
fluorescent light.
There is acoustic feedback.
Reduce the volume.
• •
Move the microphone and guitar
• •
away from the system or change
the direction of the microphone.
58
GB
The color irregularity on a TV
screen persists.
Turn off the TV at once, then turn
• •
it on after 15 to 30 minutes. If the
color irregularity still persists,
place the system farther away
from the TV.
"PLEASE CONNECT ALL SPK"
appears.
Check that all speakers are
• •
connected.
"CHILD LOCK" appears when you
press any button on the unit.
Set the Child Lock function to off
• •
(page 55).
A clicking sound is heard when
turning the power on.
This is the operating sound and it
• •
occurs when the power is turned
on or off, for example. This is not a
malfunction.
Speakers
Sound comes from only one
channel or the left and right
volume is unbalanced.
Place the speakers as
• •
symmetrically as possible.
Check that the speakers are
• •
connected securely and correctly.
The source being played back is
• •
monaural.
There is no sound from a specific
speaker.
Check that the speaker is
• •
connected securely and correctly.
Disc player
The disc tray does not open and
"LOCKED" appears on the display.
Consult your nearest Sony dealer
• •
or local authorized Sony service
facility.