HAMPTON BAY MARUCCI Use And Care Manual page 14

Assembly — Hanging the Fan (continued)
8a
Standard ceiling mounting
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (E) before
attaching the canopy (C) to the mounting bracket (A) by
turning the canopy housing until it drops into place.
WARNING: The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy screws are engaged and
firmly tightened.
□
Slide the canopy (C) up to the ceiling. Make sure you
have placed the wires safely into the outlet box (NN).
□
Secure the canopy (C) to the mounting bracket (A)
with the four screws and lock washers (BB) included
with your fan.
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the canopy ring (B).
BB
B
8b
NN
BB
A
C
14
Close-to-ceiling mounting
WARNING: Locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy screws are engaged and
firmly tightened.
□ Remove the fan from the hook on the mounting
bracket (A).
□ Secure the canopy (C) to the mounting bracket (A)
with the four screws with lock washers (BB).
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the canopy ring (B).
BB
B
NN
BB
A
C