Alpine HALO9 iLX-F309TC Quick Reference Manual page 110

Installation Instructions
1
Mount the microphone next to the eyewear
compartment with the provided Phillips screw.
3
Route the microphone down to the OBD2 connector
and route both Microphone and OBD2 cables to the
radio cavity as shown below.
5
Connect the radio harness (according to the
vehicles sound system) following the system
diagram on pages 9 or 10.
iLX-F309TCM
2
Connect the Black OBD2 adapter to the White
OBD2 port below the driver's knee cover.
4
Connect the FM, GPS, SAT Radio Antenna and USB
adapters.
6
Mount the iLX-F309TCM source unit using the (4)
10mm factory screws.
Toyota Tacoma
˜ 7/19