Alpine HALO9 iLX-F309TC Quick Reference Manual page 108

Factory Unit Disassembly Process
1
Use a panel removal tool to release clips of the
radio bezel and remove it.
3
Use a panel removal tool remove the driver's side A
pillar screw cover.
5
Use a panel removal tool to release the clips on the
eye wear storage compartment and remove it.
iLX-F309TCM
2
Use a 10mm socket to extract (4) 10mm screws
from the factory radio, disconnect and remove it.
4
Use a 10mm socket to extract the screw from the A
pillar panel cover.
6
Remove the drive's side door sill by carefully lifting
it.
Toyota Tacoma
˜ 5/19