Alpine HALO9 iLX-F309TC Quick Reference Manual page 109

Factory Unit Disassembly Process (Continued)
7
Remove the plastic nut on the driver's kick panel
and carefully lift it to remove it.
SR & SR5 Models Only
SR and select SR5 models have a smaller size radio opening. Locate the SR/SR5 application bezel and switch it
before beginning the iLX-F309TCM installation. The steps below will guide you through the process.
1
Remove (4) Phillips screws. (2) on each side.
iLX-F309TCM
8
Extract (3) 10mm screws from the driver's side knee
cover, release the clips and remove it.
2
Attached the smaller bezel using the (4) screws
previously removed.
Toyota Tacoma
˜ 6/19