Alpine HALO9 iLX-F309TC Quick Reference Manual page 111

Installation Instructions (Continued)
7
Snap the radio bezel back in place.
9
Use a long magnetized Phillips screwdriver to
secure the display to the source unit using the
provided (4) M4 Phillips screws.
11
Slide screw cover into place. Note: Failure to
mount the cover properly may cause the iLX-
F309TCM to not turn ON or function properly.
13
Return all removed components back to their
corresponding location and connect the Negative (-)
battery terminal.
iLX-F309TCM
8
Insert the iLX-F309 display into the source unit
10
Use a piece of double sided tape on a ¼" drive
extension (or any other hand tool with a flat side) to
slide screw cover into place.
12
Secure the display screw cover with the provided
2mm Phillips screw.
Toyota Tacoma
˜ 8/19