Nokia RM-227 User Manual page 92

Power saving — Enable or disable conservation of
•
battery power.
To restore all settings to their original values, select
Options Restore defaults.
>
Security settings for wireless LAN access
points
Select Menu Tools Settings
> >
points. Select Options New access point
>
create a wireless LAN access point, or select a wireless
LAN access point and Options
WEP security settings
In the access point settings, select
mode > WEP.
Wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When WEP security mode is in use,
if your device receives a data packet not encrypted with
the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same
WEP key.
Select WLAN security sett.
WEP key in use — Select the desired WEP key.
•
Authentication type — Select
•
WEP key settings — Edit the settings for the WEP key.
•
802.1x security settings
In the access point settings, select
mode > 802.1x.
92
802.1x
a wireless network, and prevents access if the
authorization process fails.
Select
•
•
Connection Access
> >
and start to
•
> Edit.
WLAN security
The settings available for editing may vary.
WPA security settings
In the access point settings, select
mode
Select
•
•
and from the following:
Open or Shared.
•
WLAN security
The settings available for editing may vary.
authenticates and authorizes devices to access
WLAN security sett.. and from the following:
WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
EAP plug-in settings — If you selected
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key — If you selected
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
WLAN security
> WPA/WPA2.
WLAN security sett.. and from the following:
WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
EAP plug-in settings — If you select
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key — If you select WPA mode
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
WPA mode
>
WPA mode Pre-
>
WPA mode
>
Pre-
>