Table of Contents
Advertisement
connect to the Internet and browse web pages, you
must first define Internet access points for these
services. You may need to set up several Internet access
points, depending on the sites you want to access. For
example, browsing the Web may require one access
point, and accessing your company intranet may
require another. To connect to the Internet over GPRS,
your device may have predefined, default Internet
access point settings.
When you switch on your device for the first time, the
access points may be configured automatically based
on the service provider information in your SIM card.
You can also receive the access points settings in a
message from your service provider. This might reduce
the number of settings you need to enter yourself.
The available options may vary. Some or all access
points may be preset for your device by your service
provider. You may not be able to add, edit, or delete
access points.
Contact your service provider and e-mail service
provider for more information on access points and
their settings.
See "Connection settings," p. 89.
Set up an Internet access point for
packet data (GPRS)
When you switch the device on, it may recognize the
SIM card provider and configure the correct text
message, multimedia message, and GPRS settings and
access points automatically.
1. Select
Menu
Tools
Settings
>
>
>
points.
2. Select
Options
New access
point. To use an
>
existing access point as a basis for the new one,
select
Use existing
settings. To start with an empty
access point, select
Use default
3. Define the following settings.
Connection name
— Enter a descriptive name for
•
the connection.
Data bearer
— Select
Packet
•
Access point name
— Enter the name for the
•
access point. The name is usually provided by
your service provider or network operator.
User name
— Enter your user name if required
•
by the service provider. User names are often
case-sensitive and provided by your service
provider.
Prompt password
— Select
•
password each time you log into a server or
to save the password in your device memory and
automate the login.
Password
— Enter your password if required by
•
the service provider. The password is often case-
sensitive provided by the service provider.
Authentication
— Select
Secure
•
your password encrypted or
password encrypted when possible.
Homepage
— Enter the Web address of the page
•
you want to display as a home page when you
use this access point.
4. After defining the settings, select
Advanced settings
to define the advanced settings
or
Back
to save the settings and exit.
Connection
Access
>
settings.
data.
Yes
to enter your
No
to always send
Normal
to send your
Options
>
61
Advertisement
Table of Contents
