Nokia RM-227 User Manual page 33

to the remote e-mail server while connecting to the
mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
My e-mail address — Enter the e-mail address given
•
to you by your service provider. Replies to your
messages are sent to this address.
User name — Enter the user name for the e-mail
•
service.
Password — Enter the password for the e-mail
•
service.
Outgoing mail serv. — Enter the IP address or host
•
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
Access point in use — Select the Internet access point
•
that the device uses for sending the e-mail messages
that you send.
Security (ports) — Select the security option used to
•
secure the connection to the remote mailbox.
Port — Define a port for connection.
•
User settings
Select User settings and from the following settings:
My name — Enter a name to appear before your e-
•
mail address when you send e-mail.
Reply-to — Select whether you want replies to be
•
redirected to a different address. Select On, and enter
the e-mail address to which you want to direct the
replies. You can only enter one address.
Delete e-mails from — Select whether you want to
•
delete the e-mails only from the device or from both
the device and the server. Select
want to confirm from where the e-mail should be
deleted every time you delete an e-mail.
Send message — Select to send the e-mail as soon
•
as possible, to send it the next time you retrieve e-
mail, or to store the e-mail in the outbox, from where
you can send it later.
Send copy to self — Select whether you want to save
•
a copy of the e-mail to your remote mailbox and to
the address defined in My e-mail address
settings for Outgoing e-mail.
Include signature — Select whether you want to
•
attach a signature to your e-mail messages.
New e-mail alerts — Select whether you want to
•
receive the new e-mail indications (a tone and a
note) when new mail is received to the mailbox.
Flash on new e-mails — Select how long you want
•
the notification light to blink when you receive a
new e-mail, or whether you want the notification
light to blink at all.
Retrieval settings
Select Retrieval settings and from the following
settings:
E-mail to retrieve (for POP3 mailboxes only) — Select
•
whether you want to retrieve only the e-mail header
information such as sender, subject and date, e-mail,
or e-mail with attachments.
Retrieval amount — Select the number of e-mails
•
you want to retrieve from the remote server to your
mailbox.
IMAP4 folder path (for IMAP4 mailboxes
•
only) — Define the folder path for folders to be
subscribed.
Always ask if you
in the
33