Nokia RM-227 User Manual page 91

the connection active until you select
Disconnect.
VPN
VPN access points
To manage VPN access points, select
points > Options, and from the following:
Edit — Edit the selected access point. If the access
•
point is in use or its settings are protected, you
cannot edit it.
New access point — Create a new VPN access point.
•
Delete — Delete the selected access point.
•
VPN access point settings
Contact your service provider for the correct access
point settings.
To edit VPN access point settings, select the access point
and Options.
Select from the following:
Connection name — Enter a name for the VPN
•
connection. The maximum length of the name is 30
characters.
VPN policy — Select a VPN policy to be used with this
•
access point.
Internet access pt. — Select the Internet access point
•
to be used with this VPN access point.
Proxy serv. address — Enter the proxy server address
•
of this VPN access point.
Proxy port number — Enter the number of the proxy
•
port.
Wireless LAN
Options
>
Select Menu
LAN.
To have an indicator displayed when there is a wireless
LAN available in your current location, select
availability > Yes.
VPN VPN access
>
To select the time interval for your device to scan for
available wireless LANs and update the indicator, select
Scan for networks.
Advanced WLAN settings
Select Menu
LAN Options
>
advanced settings are normally defined automatically,
and changing them is not recommended.
To edit the settings manually, select
config. > Disabled, and define the following:
Long retry limit
•
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
Short retry limit
•
transmission attempts if the device does not receive
a clear-to-send signal from the network.
RTS threshold
•
the wireless LAN access point device issues a request
to send before sending the packet.
TX power level
•
device when sending data.
Radio measurements
•
measurements.
Tools Settings Connection
> > > >
Show
Tools Settings Connection
> > > >
Advanced settings. The wireless LAN
>
Automatic
— Enter the maximum number of
— Enter the maximum number of
— Select the data packet size at which
— Select the power level of your
— Enable or disable the radio
Wireless
Wireless
91