Nokia RM-227 User Manual page 42

Third: select a preferred net call profile (optional)
If you select a preferred net call profile,
automatically uses this network profile to connect to
the net call service.
1. Select Menu Connect.
>
2. Select Preferred profile
just created.
3. Select Back until you return to the main menu.
Tip: You can also use manual login to the net
call service. Use the same settings instructions
as with automatic login, but ensure that
Registration is set to
Transport type is set to
manual login, you need to manually select the
network used in the net call service.
Connect to the net call service
To make or receive a net call, your device must be
connected to a net call service. Select
Internet tel..
If you have selected automatic login, your device
automatically connects to the net call service. If you
manually login to the service, choose an available
connection network from the list, and select
connect to the net call service. The saved networks,
which are marked with a star icon, are shown first on
the list. If you want to stop the connection from
establishing, select Cancel.
Select Options and from the following:
42
•
Internet tel.
•
Internet tel..
>
•
and the net call profile you
•
•
When needed and
UDP or TCP. With
•
•
Menu Connect.
> >
The available options may vary.
Your device can be connected only to one wireless LAN
access point at a time. If you use two or more net call
Select to
services, which use the same access point, your device
may be connected to multiple services at the same time.
The service used for outgoing net calls is shown in the
view, where the connection networks are listed, and
can be changed by selecting
Connect to service — to establish a connection to a
service when there is a net call service and suitable
connection network available.
Disconnect from serv. — to end the connection to
the net call service.
Change service — to choose the net call service for
outgoing calls if the device is connected to more
than one service. This option is shown only if there
is more than one configured service available.
Configure service — to configure new services. This
option is shown only if there are services that have
not been configured.
Save network — to save the network to which you
are currently connected. The previously saved
networks are marked with a star icon on the list of
connection networks. This option is shown only if
you are connected to an unsaved wireless LAN
network.
Use hidden network — to connect to a net call
service using a hidden wireless LAN network.
Refresh — to manually refresh the list of connection
networks. Use this option, if your wireless LAN
network is not shown on the list. The list is also
refreshed automatically every 15 seconds.
Change service.