Remote Control And App Instructions - Toshiba RAC-PT1412HVWRU User Manual

REMOTE CONTROL AND APP INSTRUCTIONS

Handling the Remote Control
26 ft (8 meters)
Inserting and Replacing Batteries
Page 22
LOCATION OF THE REMOTE CONTROL
Use the remote control within a distance of 26 ft. (8m) from the air
conditioner, pointing it towards the unit. The unit will beep when
it receives a signal.
CAUTION
• The air conditioner will not operate if curtains, doors or
other materials block the signals from the remote control to
the unit.
• Prevent any liquid from spilling onto the remote control.
Do not expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly.
Use curtains to prevent the sunlight from falling on the
receiver.
• If other electrical appliances react to the remote control,
either move these appliances or consult your local dealer.
Your air conditioning unit may come with two AAA
batteries (some units). Put the batteries in the
remote control before use.
1. Slide the back cover from the remote
control downward, exposing the battery
compartment.
2. Insert the batteries, paying attention to match
up the (+) and (-) ends of the batteries with the
symbols inside the battery compartment.
3. Slide the battery cover back into place.
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries
• Do not leave batteries in the remote control if
you don't plan on using the device for more
than 2 months.
User Manual