GAS GAS EC250-F SUOMI User Manual page 56

Selecting the temperature unit
To change the temperature
display between ºC and ºF, press
button 1.
Confirm by pressing button 2.
Selecting the danger
temperature
Note:
This step can only be taken on
vehicles fitted with the optional
temperature sensor.
When the engine temperature
exceeds the set value, the
warning LED on the right lights
up.
Default value: 110 °C (230ºF)
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
56
- -
Selecting the warning
temperature
Note:
This step can only be taken on
vehicles fitted with the optional
temperature sensor.
When the engine temperature
exceeds the set value, the
warning LED on the left lights up.
Default value: 90 °C (190ºF)
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.