Compaq LTE 5000 Setup Manual page 80

. . . . . . . . . . . . . . . . . . . . . . . . .
Follow these steps to place the hard drive into the MultiBay Hard
Drive Carrier and to insert the carrier into the computer MultiBay:
1. Save your work and close applications.
2. Shut down the computer: click the Start button, click Shut
Down, then click Yes.
3. Slide to the right and hold the release
MultiBay Hard Drive Carrier.
4. With the labels on the hard drive facing up and the connector on
the drive facing the connector inside the carrier, place the drive
into the carrier
5. Push the drive toward the back of the carrier
connector is fully seated.
6. Allow the release to slide back to the left
in the carrier.
Placing the Hard Drive into the MultiBay Hard Drive Carrier
.
on the right front of the
until the
to secure the drive
Working with Removable Drives 6-13