Compaq LTE 5000 Setup Manual page 123

. . . . . . . . . . . . . . . . . . . . . . . . .
5. Press Enter to continue.
The Diagnostics menu appears.
6. Select Computer Checkup from the Diagnostics menu.
A Test Option menu appears.
7. Select "View the Device List" from the Test Option menu.
A list of the installed Compaq devices appears.
8. If the list of installed devices is correct, select OK.
The Test Option menu appears.
NOTE: If the list is incorrect, ensure that any new devices are
installed properly. If you do not find an installation problem
with a Compaq device not on the list, call your Compaq
authorized dealer, reseller, or service provider. Non-Compaq
devices may not be detected.
9. Select one of the following from the Test Option menu:
10. Follow the instructions on the screen as the devices are tested.
When testing is complete, the Test Option menu appears.
11. Exit the Test Option menu.
12. Exit the Diagnostics menu.
11-2 Running Compaq Diagnostics
Quick Check Diagnostics.—Runs a quick, general test on
each device with a minimal number of prompts. If errors
occur, they are displayed when the testing is complete. You
cannot print or save the error messages.
Automatic Diagnostics.—Runs unattended, maximum
testing of each device with minimal prompts. You can
choose how many times to run the tests, to stop on errors, or
to print or save a log of errors.
Prompted Diagnostics—Allows maximum control over
testing the devices. You can choose attended or unattended
testing, decide to stop on errors, or choose to print or save a
log of errors.