Removing The Audio Pca - HP Compaq Evo N1010v Series Service Manual

Removing the Audio PCA

(Service Partners Only)
NOTE: The following audio PCA removal instructions apply only to HP Pavilion 5300 and 5200,
HP Compaq nx9010, and Compaq Presario 2500 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
•
Hard disk drive (page 2-9)
•
Keyboard cover (page 2-13)
•
Keyboard (page 2-16)
•
Switchboard PCA (page 2-19)
•
Display assembly (page 2-23)
•
Top case (page 2-26)
3. Disconnect the audio PCA cable from the motherboard.
4. Remove the audio PCA cable from the clip on the bottom case.
5. Remove the two M2.0×3.0mm flathead screws that secure the audio PCA shield
to the bottom case.
6. Remove the audio PCA shield.
Service Manual Removal and Replacement 2-35