Removing The Audio/Infrared Board - HP Pavilion dv2000 Maintenance And Service Manual
Hp pavilion dv2000 notebook pc
Hide thumbs
Also See for Pavilion dv2000:
- User manual (32 pages) ,
- Instruction manual (2 pages) ,
- Maintenance and service manual (310 pages)
Table of Contents
Advertisement
2. Release the ZIF connector to which the audio/infrared board
cable is connected and disconnect the cable 1 from the
system board.
3. Remove the two Phillips PM2.5×5.0 screws 2 that secure the
audio/infrared board to the computer.
4. Lift the rear edge of the audio/infrared board 3 and swing it
forward until the audio connectors disengage from the
base enclosure.
5. Remove the audio/infrared board 4.
Removing the Audio/Infrared Board
Reverse the above procedure to install the audio/infrared board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–57
- Quick Links:
- Memory Module
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
