Speakers - HP Envy 14-1111 Maintenance And Service Manual

Speakers

Description
Speakers (include cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the hard drive (see
6. Remove the memory module/wireless module compartment cover (see
on page
7. Disconnect the battery charger board ribbon cable from the system board (see
board on page
8. Remove the top cover (see
9. Disconnect the optical drive cable from the system board (see
10. Remove the system board (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the audio/USB board.
2. Remove the four Phillips PM2.0×3.0 screws (2) that secure the speakers to the base enclosure.
3. Remove the speakers (3).
Mass storage device on page
41).
48).
Top cover on page
Battery on page
50).
System board on page
Spare part number
608381-001
34).
36).
WLAN module
Optical drive on page
62).
Component replacement procedures
Battery connector
59).
69