HP EliteBook 8440W Maintenance And Service Manual page 75

12. If it is necessary to replace the display bezel or any of the display assembly subcomponents, follow these steps:
a. Remove the four rubber screw covers 1 and the four Torx T8M2.5×6.0 screws 2 that secure the display
bezel to the display assembly.
b. Flex the top inside edge 1, the left and right inside edges 2, and the bottom inside edge 3 of the display
bezel until the bezel disengages from the display enclosure.
c. Remove the display bezel 4. The display bezel is available using the following spare part numbers:
◆
594036-001 - Display bezel for use on HP EliteBook 8440p equipped with a webcam
◆
594035-001 - Display bezel for use on HP EliteBook 8440p not equipped with webcam
◆
594757-001 - Display bezel for use on HP EliteBook 8440w equipped with a webcam
◆
594756-001 - Display bezel for use on HP EliteBook 8440w not equipped with webcam
Maintenance and Service Guide
Removal and replacement procedures
4–31