HP EliteBook 8440W Maintenance And Service Manual page 74

Removal and replacement procedures
CAUTION: Support the display assembly when removing the following screws. Failure to support the display
Ä
assembly can result in damage to the display assembly and other computer components.
7. Remove the two rubber screw covers 1 and two Torx T8M2.5×6.0 screws 2 that secure the display assembly
to the back of the computer.
8. Remove the two Torx T8M2.5×6.0 screws 3 that secure the display assembly to the bottom of the computer.
9. Turn the computer right-side up and open the display.
10. Remove the two Torx T8M2.5×6.0 screws 1 that secure the display assembly hinges to the base enclosure.
11. Lift the display assembly 2 straight up and remove it.
4–30 Maintenance and Service Guide