Part 3 - Appendix; Troubleshooting - Idis DC-S Series Installation Manual

Part 3 - Appendix

Troubleshooting

Problem
The main unit won't turn
on.
I can't see Live videos.
Images are blurry.
Video color appears
incorrect.
Images are blinking.
Lost the admin ID and
password and unable
to connect to a network
camera.
Unable to launch IDIS Web.
Check
• Check the power cable connection.
• Check the power outlet.
• Check the camera's power status.
• Check the network connection status of the computer and the network camera.
• Make sure the lens is clean. If not, clean it using a soft piece of cloth or a brush.
• Make sure the lens is in focus. Adjust the focus during daytime.
• If there is too much light coming into the camera or the camera is picking up an
overly bright light source, adjust the camera's position/angle accordingly.
Check the white balance settings. If using the Auto option, it may take some time for
the white balance to be adjusted.
If the camera is pointed at the sun or a fluorescent lamp, adjust the camera's angle away.
You must perform a factory reset. A factory reset will revert all settings, including
network settings, to their factory defaults. After performing a factory reset, make a
memo of the admin ID and password as a safety precaution.
If the IDIS Web login screen is not loading, check which version of Microsoft Internet
Explorer you are using. IDIS Web may not launch properly on versions 8.0 or below.
Part 3 - Appendix
17