Changing The Projected Image (Source Search) - Epson EMP-X56 User Manual

Changing the Projected Image (Source Search)

The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
You can project the target image quickly because it skips input ports
where no image is being input.
Computer1 Computer2
The input port where no image
signal is being input is skipped.
* EMP-83/822 only
Procedure
When your video equipment is connected, start playback before beginning
this operation.
Using the remote control
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
*
S-Video Video
Using the control panel
The following screen showing the status of image signals is
q
displayed when only the image that the projector is
currently displaying is available, or when no image signal
can be found. You can select the input port where the
connected equipment you want to use is projecting. If no
operation is performed after about 10 seconds, the screen
closes.
For EMP-83/822
13