Initiating Or Restoring From Hibernation - HP Compaq Presario,Presario V4000 Hardware And Software Manual

Initiating or Restoring from Hibernation

Task
Initiate
hibernation.
Allow the system
to initiate
hibernation
Restore from
hibernation.
Hardware and Software Guide
Procedure
With the notebook on, use one of
the following procedures:
Briefly press the
power/standby button.
Select Start > Shut Down >
Hibernate. (If the Hibernate
option is not displayed, press
and hold shift
No action is required. If the
notebook is running on battery
power and hibernation is
enabled, the system initiates
hibernation after 30 minutes of
notebook inactivity or when the
battery pack reaches a critical
low-battery condition.
If the notebook is
connected to external
power, the system does
not initiate hibernation.
Use one of the following
procedures:
Briefly press the
power/standby button.
If the system initiated
hibernation because of a
critical low-battery condition,
connect external power or
insert a charged battery pack
before you press the
power/standby button.
.
)
Result
The power/standby
light is turned off.
The screen is
cleared.
The power/standby
light is turned off.
The screen is
cleared.
The power/standby
light is turned on.
Your work is
returned to the
screen.
Power
2–9