Disabling Or Restarting Digital Cards - HP Compaq Presario,Presario V4000 Hardware And Software Manual

Digital Memory Cards (Select Models Only)

Disabling or Restarting Digital Cards

An inserted digital card uses power even when the card is not in
use. Disabling the card conserves power.
To disable an inserted digital card:
»
Select the My Computer icon on the Windows desktop,
right-click the drive assigned to the card, and then select
Eject. (The card is stopped but is not released from the
Memory Reader.)
To restart the card, remove and then reinsert it. For instructions,
refer to
earlier in this chapter.
7–4
"Inserting Digital Cards" and "Removing Digital Cards,"
Hardware and Software Guide