Restoring Default Settings In The Setup Utility; Using Advanced Setup Utility Features - HP Compaq Presario,Presario V4000 Hardware And Software Manual

Setup Utility
Restoring Default Settings in the
Setup Utility
The following procedure explains how to restore the Setup utility
default settings.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
to enter setup," is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select Exit > Load Setup Defaults.
3. When the Setup Confirmation is displayed, press
your preferences.
4. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
The Setup utility default settings are set when you exit the Setup
utility and are in effect when the notebook restarts. Identification
information, including ROM version information, is retained.

Using Advanced Setup Utility Features

This guide describes the Setup utility features recommended
for all users. For more information about the Setup utility
features recommended for advanced users only, refer to the
Help and Support Center, which is accessible only when the
notebook is in Windows. To access the Help and Support Center,
select Start > Help and Support.
The Setup utility features available for advanced users include a
hard drive self-test, a Network Service Boot, and settings for boot
order preferences.
13–4
while the prompt, "Press <F10>
f10
Hardware and Software Guide
to save
enter
f10,