Initiating Or Resuming From Standby - HP Compaq Presario,Presario V4000 Hardware And Software Manual

Power

Initiating or Resuming from Standby

Task
Initiate standby
Allow the system
to initiate
standby.
Resume from
standby.
2–8
Procedure
With the notebook on, use one of
the following procedures:
Press the fn+f5 hotkey.
Close the notebook display.
Select Start > Turn Off
Computer > Stand By.
No action is required. The system
initiates standby
After 10 minutes of inactivity
while running on battery power.
After 25 minutes of inactivity
while running on external
power.
Use one of the following
procedures:
Briefly press the power/standby
button.
Use the TouchPad or press a
TouchPad button.
Press any key on the keyboard.
Open the display if standby
was initiated by closing the
notebook.
Result
The power/standby
light blinks.
The screen is
cleared.
The power/standby
light blinks.
The screen is
cleared.
The power/standby
light is turned on.
Your work returns to
the screen.
Hardware and Software Guide