System Configuration menu
Select
Language Support
Button Sound (select models only)
Virtualization Technology (select models only)
Processor C6 State (select models only)
LAN Power Saving (select models only)
Card Reader/1394 Power Saving (select models
only)
Fan Always On
Action Keys Mode
Boot Options
Diagnostics menu
Select
Hard Disk Self Test
Secondary Hard Disk Self Test (select models only) Run a comprehensive self-test on a secondary hard drive.
Memory Test
To do this
Change the language of Setup Utility.
Enable/disable the capacitive button tapping sound.
Enable/disable the processor Virtualization Technology.
Enable/disable the processor C6 sleep state.
Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Enable/disable Card Reader/1394 Power Saving.
Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Enable/disable Action Keys Mode.
Set the following boot options:
●
POST hotkey delay (sec.)―Set the delay for the f1, f2, f9, f10, f11,
and
f12
functions of Setup Utility in intervals of 5 seconds each (0,
5, 10, 15, 20).
●
CD-ROM Boot―Enable/disable boot from CD-ROM.
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
●
Boot Order―Set the boot order for:
◦
Notebook Hard Drive
◦
Internal CD/DVD ROM Drive
◦
USB Disk on Key/USB Hard Disk
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
Network Adapter
To do this
Run a comprehensive self-test on the hard drive.
NOTE:
On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Run a diagnostic test on the system memory.
Setup Utility menus
95